+- ds30 Loader free edition forums (https://picbootloader.com/forum)
+-- Forum: Support (https://picbootloader.com/forum/forumdisplay.php?fid=3)
+--- Forum: 16-bit firmwares (https://picbootloader.com/forum/forumdisplay.php?fid=6)
+--- Thread: PIC24FJ128GA010 Configuration Error [solved] (/showthread.php?tid=196)
PIC24FJ128GA010 Configuration Error [solved] - Berkay Dogan - 2011-07-01
Hi,
I complied my project with Mplab C30. Configuration_bits box was checked.And then i download the firmware to the pic by pickit2.
when i tried to connect with bootloader i got an error "Last row containing configs was found in hex file, last page has been disabled. Consult manual for more information.".
Thanks.
RE: PIC24FJ128GA010 Configuration Error - Mikael Gustavsson - 2011-07-04
Hi,
I'm sorry, I will get back to this thread when the documentation is updated.
RE: PIC24FJ128GA010 Configuration Error - Mikael Gustavsson - 2011-07-07
The trouble shooting sectio now contains an explanation of this message:
http://mrmackey.no-ip.org/elektronik/ds30loader/files/documents/ds30_loader_-_main_manual.pdf
RE: PIC24FJ128GA010 Configuration Error - Berkay Dogan - 2011-07-07
Hi,
Thanks for your reply.I tried all the combinations of the communication changes, but i haven't got any response from the GUI.The board that i am using needs to be remap like RF5/RP17->> U2TX and RF4/RP10 ->> U2RX.I have only tomorrow to finish this issue.Thanks for your replies.If you can help me, I will be appreciated.
Best Regards.
Berkay.
RE: PIC24FJ128GA010 Configuration Error - Mikael Gustavsson - 2011-07-07
I told you, that device does not have PPS. All pins are fixed.
Continue and answer in the thread where I gave you trouble shooting guidance.