ds30 Loader free edition forums
PIC24FJ (usb host 2.1) - Printable Version

+- ds30 Loader free edition forums (https://picbootloader.com/forum)
+-- Forum: Support (https://picbootloader.com/forum/forumdisplay.php?fid=3)
+--- Forum: 16-bit firmwares (https://picbootloader.com/forum/forumdisplay.php?fid=6)
+--- Thread: PIC24FJ (usb host 2.1) (/showthread.php?tid=21851)



PIC24FJ (usb host 2.1) - papkino - 2016-09-08

Hi,
I'm following these instructions (http://www.hobbytronics.co.uk/usb-host/usb-host-board-v2) in order to program the device (an usb host 2.1) with the latest serial firmware. Should I necessarly connect the reset pin after pushing the write button in the GUI, or can I just unplugged the wires, and the supply to device, to make it work?

Thank you in advance,
Antonio


RE: PIC24FJ (usb host 2.1) - Mikael Gustavsson - 2016-09-12

Hi Antonio,
Please turn to Hobbytronics.

Regards
Mikael