+- ds30 Loader free edition forums (https://picbootloader.com/forum)
+-- Forum: Support (https://picbootloader.com/forum/forumdisplay.php?fid=3)
+--- Forum: 8-bit firmwares (https://picbootloader.com/forum/forumdisplay.php?fid=7)
+--- Thread: PIC16F1454 newbee (/showthread.php?tid=2362)
PIC16F1454 newbee - hyltoft14@yahoo.dk - 2015-09-07
Hi Michael
I am new to the bootloading, so please tell me if i am on the wrong track!
Is it correct that when the PIC is programmed with the bootloader it will create a virtuel COM port if connected to a PC or MAC computer?
I then have to create a user program using MPLAP. Here i can save the user program as a hex file and program it into the PIC controller using the ds30 Loader?
If the above is correct then:
If i start Windows Hyperterminal program and open the virtuel COM port end sends "A" to the PIC controller, at what
address can i see that "A" in the PIC controller?
RE: PIC16F1454 newbee - Mikael Gustavsson - 2015-09-08
Hi,
I am sorry but your understanding is not correct. Unfortunately I have no time to educated how PIC and boot loaders work.
I suggest that you try another forum and come back here if you need help with ds30 Loader.