+- ds30 Loader free edition forums (https://picbootloader.com/forum)
+-- Forum: Support (https://picbootloader.com/forum/forumdisplay.php?fid=3)
+--- Forum: 16-bit firmwares (https://picbootloader.com/forum/forumdisplay.php?fid=6)
+--- Thread: Strange behaviour with PIC24FL256GB108 (/showthread.php?tid=839)
Strange behaviour with PIC24FL256GB108 - davdav - 2013-11-29
Hi everybody,
I have 5 devices with PIC24FJ256GB108
Three of them work perfectly and I can download firmware.
Two of them reports the attached error
The board are them same and also the settings of ds30loader.
What could be?
How to solve?
Thank you
Best Regards,
Davide
RE: Strange behaviour with PIC24FL256GB108 - Mikael Gustavsson - 2013-12-01
Hello,
Have you tried a different baud rate such as 9600 or 19200?
Any different if you reset the device manually?
Best regards
Mikael
RE: Strange behaviour with PIC24FL256GB108 - davdav - 2013-12-02
Hi Mikael,
I will try different baud rate and I'll let you know.
I can't reset manually since the board use the DTR to reset it.
Thank you.
Best Regards,
Davide