2011-05-19, 11:00:51
(This post was last modified: 2012-12-23, 19:58:10 by Mikael Gustavsson.)
Dear Mikael,
ds30Loader version 1.0.4 January 2011 worked on pic18F87J50 UART1 at 115200 baud with 4MHz crystal.
But with USE_UART2 defined, loader could not be found.
I tried now version 3.0.0 April 2011 with settings changed:
processor 18F87J50 ; @4MHz no PLL
#define OSCF 4000000
CONFIG DEBUG = OFF ; 1 Background debugger disabled *
CONFIG XINST = OFF ; 0 extended instruction set disabled
CONFIG PLLDIV = 1 ; 111 No prescale 4 MHz oscillator drives PLL *
CONFIG WDTEN = OFF ; 0 wathcdog timer
CONFIG CPUDIV = OSC1 ; No CPU System clock divide
CONFIG FOSC = HSPLL ;
-- config copied from previous version.
now unfortunately ds30Loader could not be found on any port.
It seems i miss some new setting that was not in a previous version.
Dmitri
ds30Loader version 1.0.4 January 2011 worked on pic18F87J50 UART1 at 115200 baud with 4MHz crystal.
But with USE_UART2 defined, loader could not be found.
I tried now version 3.0.0 April 2011 with settings changed:
processor 18F87J50 ; @4MHz no PLL
#define OSCF 4000000
CONFIG DEBUG = OFF ; 1 Background debugger disabled *
CONFIG XINST = OFF ; 0 extended instruction set disabled
CONFIG PLLDIV = 1 ; 111 No prescale 4 MHz oscillator drives PLL *
CONFIG WDTEN = OFF ; 0 wathcdog timer
CONFIG CPUDIV = OSC1 ; No CPU System clock divide
CONFIG FOSC = HSPLL ;
-- config copied from previous version.
now unfortunately ds30Loader could not be found on any port.
It seems i miss some new setting that was not in a previous version.
Dmitri