2011-07-22, 23:59:12
(This post was last modified: 2024-07-04, 21:04:56 by Mikael Gustavsson.)
Hi
I have a problem with overwrite bootloader i get error "bl protection tripped"
is there some way to fix it ??
below my settings.inc
I have a problem with overwrite bootloader i get error "bl protection tripped"
is there some way to fix it ??
below my settings.inc
Code:
;------------------------------------------------------------------------------
;
; Title: ds30 Loader for PIC18F
;
; File description: user settings and configuration bits
;
; Copyright: Copyright ďż˝ 09-11, Mikael Gustafsson
;
; History: 3.0.0 first version of this file
;
;------------------------------------------------------------------------------
;------------------------------------------------------------------------------
; This file is part of ds30 Loader.
;
; ds30 Loader is free software: you can redistribute it and/or modify
; it under the terms of the GNU General Public License as published by
; the Free Software Foundation.
;
; ds30 Loader is distributed in the hope that it will be useful,
; but WITHOUT ANY WARRANTY; without even the implied warranty of
; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
; GNU General Public License for more details.
;
; You should have received a copy of the GNU General Public License
; along with ds30 Loader. If not, see <http://www.gnu.org/licenses/>.
;------------------------------------------------------------------------------
;------------------------------------------------------------------------------
; Device
;------------------------------------------------------------------------------
processor 18F458 ;xxx
;------------------------------------------------------------------------------
; Includes
;------------------------------------------------------------------------------
#include "devices.inc"
;------------------------------------------------------------------------------
; User preferences
;------------------------------------------------------------------------------
radix DEC
#define OSCF 10000000 ;xxx oscillator frequency
#define BLINIT 2000 ;xxx hello receive timeout [ms]
#define HELLOTRIES 2 ;xxx number of non hello characters received before branching to the user application
#define BLTIME 2000 ;xxx data receive timeout [ms]
;------------------------------------------------------------------------------
; UART settings
;------------------------------------------------------------------------------
#define USE_UART1 1 ;xxx uncomment to use uart1
;#define USE_UART2 1 ;xxx uncomment to use uart2
#define BAUDRATE 38400 ;xxx baudrate
;#define USE_ABAUD 1 ;xxx uncomment to use auto baud rate detection, READ ERRATA FIRST
;#define USE_BRG16 1 ;xxx uncomment to use 16-bit brg
#define USE_TXENABLE 1 ;xxx uncomment to use a tx enable pin
#ifdef USE_TXENABLE
#define TRISR_TXE TRISC ;xxx tris register containing tx enable
#define LATR_TXE LATC ;xxx port register containing tx enable
#define TRISB_TXE TRISC6 ;xxx tris bit for tx enable
#define LATB_TXE RC6 ;xxx port bit for tx enable
#endif
;------------------------------------------------------------------------------
; CAN settings, commercial version only www.ds30loader.com
;------------------------------------------------------------------------------
#define ID_PIC 1 ;xxx node number for this device
#define ID_GUI 0x7ff ;xxx node number of the ds30 Loader gui
;------------------------------------------------------------------------------
; Security, commercial version only www.ds30loader.com
;------------------------------------------------------------------------------'
;------------------------------------------------------------------------------
; Advanced settings
;------------------------------------------------------------------------------
#define PROT_GOTO 1 ;xxx protect goto at 0x00
#define PROT_BL 1 ;xxx protect bootloader
ifdef IS_PIC18F
#define BLPLP 8 ;bootloader placement, pages from end
#define BLSIZEP 8 ;bootloader size [pages], used by bootloader protection
endif
ifdef IS_PIC18FJ
#define BLPLP 2 ;bootloader placement, pages from end
#define BLSIZEP 1 ;bootloader size [pages], used by bootloader protection
endif
;------------------------------------------------------------------------------
; Configuration bits, these macros can be found at the end of the inc-files located in
; C:\Program Files\Microchip\MPASM Suite\
;
; These can also be set in MPLAB IDE instead, they are found in Configure->Configuration bits...
;------------------------------------------------------------------------------
; xxx
config OSC = HS
config OSCS = OFF
;config PLLDIV = 2 ;PLL Prescaler Selection bits
;config CPUDIV = OSC1_PLL2 ;System Clock Postscaler Selection bits
;config USBDIV = 2 ;USB Clock Selection bit (used in Full-Speed USB mode only; UCFG:FSEN = 1)
;config FOSC = HSPLL_HS ;Oscillator Selection bits
;config FCMEN = OFF ;Fail-Safe Clock Monitor Enable bit
;config IESO = OFF ;Internal/External Oscillator Switchover bit
config PWRT = OFF ;Power-up Timer Enable bit
config BOR = OFF ;Brown-out Reset Enable bits
config BORV = 45 ;Brown-out Reset Voltage bits
;config VREGEN = OFF ;USB Voltage Regulator Enable bit
config WDT = OFF ;Watchdog Timer Enable bit
config WDTPS = 1 ;Watchdog Timer Postscale Select bits
;config CCP2MX = OFF ;CCP2 MUX bit
;config PBADEN = OFF ;PORTB A/D Enable bit
;config LPT1OSC = OFF ;Low-Power Timer 1 Oscillator Enable bit
;config MCLRE = ON ;MCLR Pin Enable bit
config STVR = OFF ;Stack Full/Underflow Reset Enable bit
config LVP = ON ;Single-Supply ICSP Enable bit
;config XINST = OFF ;Extended Instruction Set Enable bit
;config DEBUG = OFF ;Background Debugger Enable bit
config CP0 = OFF ;Code Protection bit
config CP1 = OFF ;Code Protection bit
config CP2 = OFF ;Code Protection bit
config CP3 = OFF ;Code Protection bit
config CPB = OFF ;Boot Block Code Protection bi
config CPD = OFF ;Data EEPROM Code Protection bit
config WRT0 = OFF ;Write Protection bit
config WRT1 = OFF ;Write Protection bit
config WRT2 = OFF ;Write Protection bit
config WRT3 = OFF ;Write Protection bit
config WRTC = OFF ;Configuration Register Write Protection bit
config WRTB = OFF ;Boot Block Write Protection bit
config WRTD = OFF ;Data EEPROM Write Protection bit
config EBTR0 = OFF ;Table Read Protection bit
config EBTR1 = OFF ;Table Read Protection bit
config EBTR2 = OFF ;Table Read Protection bit
config EBTR3 = OFF ;Table Read Protection bit
config EBTRB = OFF ;Boot Block Table Read Protection bit
;------------------------------------------------------------------------------
; End of file
;------------------------------------------------------------------------------
