2011-09-11, 20:20:44
OK, so the config is now this .....
__CONFIG _CONFIG1, _INTRC_IO & _WDT_OFF & _PWRTE_OFF & _MCLR_ON & _BODEN_OFF & _IESO_OFF & _FCMEN_OFF
__CONFIG _CONFIG2, _LVP_OFF & _DEBUG_OFF & _CPD_OFF & _WRT_PROTECT_OFF & _CP_OFF
I uncommented this section
; Set internal oscillator to 8MHz
banksel OSCCON
bsf OSCCON, IRCF0 ;bank 1
bsf OSCCON, IRCF1
bsf OSCCON, IRCF2
Would not fit in 192 so I had to change to 256
#define BLPLW 256 was 192
BL placement, words from end, should be a multiple of 64
__CONFIG _CONFIG1, _INTRC_IO & _WDT_OFF & _PWRTE_OFF & _MCLR_ON & _BODEN_OFF & _IESO_OFF & _FCMEN_OFF
__CONFIG _CONFIG2, _LVP_OFF & _DEBUG_OFF & _CPD_OFF & _WRT_PROTECT_OFF & _CP_OFF
I uncommented this section
; Set internal oscillator to 8MHz
banksel OSCCON
bsf OSCCON, IRCF0 ;bank 1
bsf OSCCON, IRCF1
bsf OSCCON, IRCF2
Would not fit in 192 so I had to change to 256
#define BLPLW 256 was 192
BL placement, words from end, should be a multiple of 64