2012-12-06, 17:03:24
(2012-12-05, 23:09:34)Mikael Gustavsson Wrote: For starters you could post your settings.inc file and tell us more about your hardware setup such as which oscillator type and speed you use.
Here is my settings file and user_code file.
I'm using an 8mhz crystal. I'm trying to use UART2 on pins
10 (TX) and 74 (RCV).
This is the 100 pin package.
I've been trying quite a bit of things and still can't get any response from the board to the GUI.
Thanks for any help you can provide.