PIC24F16KA102, Unknown firmware version [solved]

[tyralek]

Hi,

As You want, I run:

Code:

ds30LoaderConsole.exe --file=project.hex --port=com1 --device=pic24f16ka102 --baudrate=9600 --write-program -l

for original firmware 0.9.4:

Code:

Initiating download...
    Opening port com1@9600
    Searching for bl .
    Found PIC24F16KA102 fw ver. 0.9.4
    Unknown firmware version
    Closing port
    Tx 1 byte / Rx 3 bytes / 0,1s

After changing fw version to 0.9.3 (only constant change in ds30loader.s)

Code:

Initiating download...
    Opening port com1@9600
    Searching for bl .
    Found PIC24F16KA102 fw ver. 0.9.3
    Bootloader placement: 4
    Bootloader size: 4
    Waiting for bootloader to be ready...ok
    Parsing hex-file...
        File timestamp: 2010-12-09 05:33:38
        Validating hex-file...ok
        Goto user app address: 0x2AFC
        User app address: 0x200
        Flash row 0 is used, 0x00 - 0x3F
        Flash row 1 is used, 0x40 - 0x7F
        Flash row 2 is used, 0x80 - 0xBF
        Flash row 3 is used, 0xC0 - 0xFF
        Flash row 4 is used, 0x100 - 0x13F
        Flash row 5 is used, 0x140 - 0x17F
        Flash row 6 is used, 0x180 - 0x1BF
        Flash row 7 is used, 0x1C0 - 0x1FF
        Flash row 8 is used, 0x200 - 0x23F
        Flash row 9 is used, 0x240 - 0x27F
        Flash row 10 is used, 0x280 - 0x2BF
        Flash row 11 is used, 0x2C0 - 0x2FF
        Flash row 12 is used, 0x300 - 0x33F
        Flash row 13 is used, 0x340 - 0x37F
        Flash row 14 is used, 0x380 - 0x3BF
        Flash row 15 is used, 0x3C0 - 0x3FF
        Flash row 16 is used, 0x400 - 0x43F
        Flash row 17 is used, 0x440 - 0x47F
        Flash row 18 is used, 0x480 - 0x4BF
        Flash row 19 is used, 0x4C0 - 0x4FF
        Flash row 20 is used, 0x500 - 0x53F
        Flash row 21 is used, 0x540 - 0x57F
        Flash row 22 is used, 0x580 - 0x5BF
        Flash row 23 is used, 0x5C0 - 0x5FF
        Flash row 24 is used, 0x600 - 0x63F
        Flash row 25 is used, 0x640 - 0x67F
        Flash row 26 is used, 0x680 - 0x6BF
        Flash row 27 is used, 0x6C0 - 0x6FF
        Flash row 28 is used, 0x700 - 0x73F
        Flash row 29 is used, 0x740 - 0x77F
        Flash row 30 is used, 0x780 - 0x7BF
        Flash row 31 is used, 0x7C0 - 0x7FF
        Flash row 32 is used, 0x800 - 0x83F
        Flash row 33 is used, 0x840 - 0x87F
        Flash row 34 is used, 0x880 - 0x8BF
        Flash row 171 is used, 0x2AC0 - 0x2AFF
        Bootloader start address: 0x2B00
        Bootloader start page: 172
        Bootloader end page: 175
        Bootloader start row: 172
        Bootloader end row: 175
        Hex-file successfully parsed

        1116 program words found in 36 rows
        0 Eeprom words found
        0 config words found
    Erasing page 0...ok
    Writing row 0...verification error,1 try
    Writing row 0...verification error,2 try
    Writing row 0...download failed
    Closing port
    Download finished
    Tx 313 bytes / Rx 8 bytes / 0,5s