2013-09-24, 13:54:37
Hi,
I have used the ds30loader for PIC18LF26K80 a year go. At that time confirguration settings in the Bootloader and in my firmware were kept exactly the same.
Now I have to change some configurations such as:
1: Enable Power up timer
2: Enable Brownout
3: Set appropriate voltage level for Brownout
At this stage I can only change the configurations in my firmware since I can not program the device for the modified bootloader (access to the programming pins is not possible).
My questions are if I have different configuration settings in the firmware and the bootloader
1: Which configuration settings will take over (bootloader or firmware)
2: Will there be any conflicts between the configuration settings of the bootloader and the firmware.
3: Can it lead to the problems in the firmware (operation of the device).
Best Regards
I have used the ds30loader for PIC18LF26K80 a year go. At that time confirguration settings in the Bootloader and in my firmware were kept exactly the same.
Now I have to change some configurations such as:
1: Enable Power up timer
2: Enable Brownout
3: Set appropriate voltage level for Brownout
At this stage I can only change the configurations in my firmware since I can not program the device for the modified bootloader (access to the programming pins is not possible).
My questions are if I have different configuration settings in the firmware and the bootloader
1: Which configuration settings will take over (bootloader or firmware)
2: Will there be any conflicts between the configuration settings of the bootloader and the firmware.
3: Can it lead to the problems in the firmware (operation of the device).
Best Regards