Help making hex for picf184550

[Michael Scott]

Hi Mikael,

I was assuming all i have to change is the processor to PIC18F4550
in the Settings.inc, The circuit i was planning on using has a 20Mhz
crystal and 22pf cap's for timing.

When i Build All i get the following;

Debug build of project `C:\DS30-Loader\firmware_PIC18F\ds30Loader.mcp' started.
Language tool versions: MPASMWIN.exe v5.35, mplink.exe v4.35
Preprocessor symbol `__DEBUG' is defined.
Tue Oct 29 09:19:22 2013
----------------------------------------------------------------------
Clean: Deleting intermediary and output files.
Clean: Deleted file "C:\DS30-Loader\firmware_PIC18F\ds30Loader.mcs".
Clean: Done.
Executing: "C:\Microchip\MPASM Suite\MPASMWIN.exe" /q /p18F4550 "ds30loader.asm" /l"ds30loader.lst" /e"ds30loader.err" /d__DEBUG=1
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 99 : CONFIG Directive Error: (setting "RETEN" not found for the processor 18F4550)
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 100 : CONFIG Directive Error: (setting "INTOSCSEL" not found for the processor 18F4550)
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 101 : CONFIG Directive Error: (setting "SOSCSEL" not found for the processor 18F4550)
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 103 : CONFIG Directive Error: (value "HS1" not valid for setting "FOSC")
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 104 : CONFIG Directive Error: (setting "PLLCFG" not found for the processor 18F4550)
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 107 : CONFIG Directive Error: (setting "PWRTEN" not found for the processor 18F4550)
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 108 : CONFIG Directive Error: (setting "BOREN" not found for the processor 18F4550)
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 110 : CONFIG Directive Error: (setting "BORPWR" not found for the processor 18F4550)
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 111 : CONFIG Directive Error: (setting "WDTEN" not found for the processor 18F4550)
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 113 : CONFIG Directive Error: (setting "CANMX" not found for the processor 18F4550)
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 114 : CONFIG Directive Error: (setting "T0CKMX" not found for the processor 18F4550)
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 115 : CONFIG Directive Error: (setting "T3CKMX" not found for the processor 18F4550)
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 116 : CONFIG Directive Error: (setting "MSSPMSK" not found for the processor 18F4550)
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 120 : CONFIG Directive Error: (setting "BBSIZ" not found for the processor 18F4550)
Error[101] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\USER_CODE.INC 36 : ERROR: (Do you need to configura uart pins to be digital? If not, remove this line)
Halting build on first failure as requested.
----------------------------------------------------------------------
Debug build of project `C:\DS30-Loader\firmware_PIC18F\ds30Loader.mcp' failed.
Language tool versions: MPASMWIN.exe v5.35, mplink.exe v4.35
Preprocessor symbol `__DEBUG' is defined.
Tue Oct 29 09:19:23 2013
----------------------------------------------------------------------
BUILD FAILED

Thanks Michael