2022-07-20, 14:06:00
Hi,
I have been trying for the better part of two days. I tried with the zip file, and then I tried using the template provided.
However, the problem is that the DS30 Loader is not even picking up the bootloader . . .
I have extensively tested the UART with the actual target code for my board and it works, so there is nothing wrong with the device, or the board. It just seems that the PIC is not sending the "I am here" and then later "ready to bootload" signal once the bootloader code is installed. I have also tested the PCB with the bootloader installed using a terminal app to see if the codes coming from the PIC can be seen but nothing.
So, the check would be if the UART is set up correctly and from what I can tell, the answer is yes.
Any help would be appreciated.
I can provide the project if needed, but it looks like adding files to this thread is blocked
Thankyou
I have been trying for the better part of two days. I tried with the zip file, and then I tried using the template provided.
However, the problem is that the DS30 Loader is not even picking up the bootloader . . .
I have extensively tested the UART with the actual target code for my board and it works, so there is nothing wrong with the device, or the board. It just seems that the PIC is not sending the "I am here" and then later "ready to bootload" signal once the bootloader code is installed. I have also tested the PCB with the bootloader installed using a terminal app to see if the codes coming from the PIC can be seen but nothing.
So, the check would be if the UART is set up correctly and from what I can tell, the answer is yes.
Any help would be appreciated.
I can provide the project if needed, but it looks like adding files to this thread is blocked
Thankyou