2024-09-04, 16:49:27
Hello,
This is my first time using any bootloader so my experience is very limited.
I downloaded the ds30 loader free edition and tried building the project found at "firmware_12F_16F_XC8" folder using MPLAB X IDE v6.15
I am having trouble building the project even without making any changes(except putting a comment on "#error Do you need to configura uart pins to be digital? If not, remove this line")
When trying to build using the version mplab set(pack 1.2.63, xc8 v1.31) I get the following:
When trying pack 1.6.241 and xc8 v1.31 :
When trying pack 1.6.241 xc8 2.41:
I am not really sure how to tackle the problem since I'm guessing this build has already been tested and works for other people and depending on the version I am using I keep getting different errors.
Any help will be appreciated!
This is my first time using any bootloader so my experience is very limited.
I downloaded the ds30 loader free edition and tried building the project found at "firmware_12F_16F_XC8" folder using MPLAB X IDE v6.15
I am having trouble building the project even without making any changes(except putting a comment on "#error Do you need to configura uart pins to be digital? If not, remove this line")
When trying to build using the version mplab set(pack 1.2.63, xc8 v1.31) I get the following:
Code:
../src/user_code.inc:110:: error: (800) undefined symbol "EEADR"
../src/user_code.inc:132:: error: (800) undefined symbol "FSR"
../src/user_code.inc:134:: error: (800) undefined symbol "INDF"
../src/user_code.inc:211:: error: (800) undefined symbol "EEDATA"
../src/uart.inc:128:: error: (800) undefined symbol "SPBRG"
../src/uart.inc:135:: error: (800) undefined symbol "SPBRGH"
../src/uart.inc:137:: error: (800) undefined symbol "BAUDCTL"When trying pack 1.6.241 and xc8 v1.31 :
Code:
"G:\Microchip\xc8\v2.31\bin\xc8-cc.exe" -c -mcpu=16F1938 -D__DEBUG=1 -mdebugger=none -mdfp="G:/Microchip/MPLABX/v6.15/packs/Microchip/PIC12-16F1xxx_DFP/1.6.241/xc8" -fno-short-double -fno-short-float -O0 -fasmfile -maddrqual=ignore -xassembler-with-cpp -mwarn=-3 -Wa,-a -DXPRJ_default=default -msummary=-psect,-class,+mem,-hex,-file -ginhx32 -Wl,--data-init -mno-keep-startup -mno-osccal -mno-resetbits -mno-save-resetbits -mno-download -mno-stackcall -mno-default-config-bits -std=c99 -gdwarf-3 -mstack=compiled:auto:auto -o build/default/debug/_ext/1360937237/ds30loader.o ../src/ds30loader.s
Non line specific message::: warning: (1020) unknown attribute "CONFIGPROG" in chipinfo file "G:/Microchip/MPLABX/v6.15/packs/Microchip/PIC12-16F1xxx_DFP/1.6.241/xc8\pic\dat\ini\16f1938.ini" at line 185
Non line specific message::: warning: (1020) unknown attribute "IDLOCPROG" in chipinfo file "G:/Microchip/MPLABX/v6.15/packs/Microchip/PIC12-16F1xxx_DFP/1.6.241/xc8\pic\dat\ini\16f1938.ini" at line 195
Non line specific message::: warning: (1020) unknown attribute "CONFIGPROG" in chipinfo file "G:/Microchip/MPLABX/v6.15/packs/Microchip/PIC12-16F1xxx_DFP/1.6.241/xc8\pic\dat\ini\16f1938.ini" at line 185
Non line specific message::: warning: (1020) unknown attribute "IDLOCPROG" in chipinfo file "G:/Microchip/MPLABX/v6.15/packs/Microchip/PIC12-16F1xxx_DFP/1.6.241/xc8\pic\dat\ini\16f1938.ini" at line 195
"G:\Microchip\xc8\v2.31\bin\xc8-cc.exe" -mcpu=16F1938 -Wl,-Map=dist/default/debug/ds30Loader_12F_16F.X.debug.map -D__DEBUG=1 -mdebugger=none -DXPRJ_default=default -Wl,--defsym=__MPLAB_BUILD=1 -mdfp="G:/Microchip/MPLABX/v6.15/packs/Microchip/PIC12-16F1xxx_DFP/1.6.241/xc8" -fno-short-double -fno-short-float -O0 -fasmfile -maddrqual=ignore -xassembler-with-cpp -mwarn=-3 -Wa,-a -msummary=-psect,-class,+mem,-hex,-file -ginhx32 -Wl,--data-init -mno-keep-startup -mno-osccal -mno-resetbits -mno-save-resetbits -mno-download -mno-stackcall -mno-default-config-bits -std=c99 -gdwarf-3 -mstack=compiled:auto:auto -Wl,--memorysummary,dist/default/debug/memoryfile.xml -o dist/default/debug/ds30Loader_12F_16F.X.debug.elf build/default/debug/_ext/1360937237/ds30loader.o
Non line specific message::: warning: (1020) unknown attribute "CONFIGPROG" in chipinfo file "G:/Microchip/MPLABX/v6.15/packs/Microchip/PIC12-16F1xxx_DFP/1.6.241/xc8\pic\dat\ini\16f1938.ini" at line 185
Non line specific message::: warning: (1020) unknown attribute "IDLOCPROG" in chipinfo file "G:/Microchip/MPLABX/v6.15/packs/Microchip/PIC12-16F1xxx_DFP/1.6.241/xc8\pic\dat\ini\16f1938.ini" at line 195
Non line specific message::: warning: (1020) unknown attribute "CONFIGPROG" in chipinfo file "G:/Microchip/MPLABX/v6.15/packs/Microchip/PIC12-16F1xxx_DFP/1.6.241/xc8\pic\dat\ini\16f1938.ini" at line 185
Non line specific message::: warning: (1020) unknown attribute "IDLOCPROG" in chipinfo file "G:/Microchip/MPLABX/v6.15/packs/Microchip/PIC12-16F1xxx_DFP/1.6.241/xc8\pic\dat\ini\16f1938.ini" at line 195
:0:: error: (500) undefined symbols:
_main(E:\TMP\skek.o) start_initialization(E:\TMP\skek.o)
build/default/debug/_ext/1360937237/ds30loader.o:74:: error: (501) program entry point is defined more than once
(908) exit status = 1When trying pack 1.6.241 xc8 2.41:
Code:
::: error: (2096) undefined symbol "_main" (E:\TMP\xcBsis4.1\driver_tmp_6.o)
::: error: (2096) undefined symbol "start_initialization" (E:\TMP\xcBsis4.1\driver_tmp_6.o)
build/default/debug/_ext/1360937237/ds30loader.o:70:: error: (501) program entry point is defined more than onceI am not really sure how to tackle the problem since I'm guessing this build has already been tested and works for other people and depending on the version I am using I keep getting different errors.
Any help will be appreciated!