18F4620 [abandoned]

[craig]

Please supply us with your
* settings.inc.
* firmware version
* gui version  -

Hi Mikael
The version I Downloaded is as below:
Thanks for the Help so far.
What I did is to open the Firmware PIC18F file which opens in the MPLAB IDE and then change the Config and Device settings then save, Build ALL and then export the hex file out to be programmed with my Serial (P8076) Velleman Programmer. 

Kind Regards

Craig

Windows installation  ds30_loader_110115.exe  (2MB)
Firmware PIC16F 1.0.0
Firmware PIC18F 2.0.4
Firmware PIC18FJ 1.0.4
Firmware PIC24F 1.0.0
Firmware PIC24FJ 1.1.1
Firmware PIC24H 1.1.0
Firmware dsPIC30F 3.0.0
Firmware dsPIC33F 1.1.0
ds30 Loader 1.5.0
ds30 Loader GUI 1.3.14
ds30 Loader console 1.0.1

;------------------------------------------------------------------------------
;
; Title: ds30 Loader for PIC18F
;
; File description: user settings and configuration bits
;
; Copyright: Copyright © 09-11, Mikael Gustafsson
;
; History: 2.0.4 New setting: 16-bit brg
; 2.0.3 Renamed fosc to oscf
; 2.0.2 New setting: NODENR
;   New setting: NODENR_BL
;   New setting: PROT_GOTO
;   New setting: PROT_BL
; 2.0.1 New setting: HELLORETRIES
; 2.0.0 CAN support
; 1.0.2 -
; 1.0.1 -
; 1.0.0 Added BLINIT
; 0.9.2 Added tx enable support
; 0.9.1 -
; 0.9.0 first version of this file
;                                                                           
;------------------------------------------------------------------------------

;------------------------------------------------------------------------------
;    This file is part of ds30 Loader.
;
;    ds30 Loader is free software: you can redistribute it and/or modify
;    it under the terms of the GNU General Public License as published by
;    the Free Software Foundation.
;
;    ds30 Loader is distributed in the hope that it will be useful,
;    but WITHOUT ANY WARRANTY; without even the implied warranty of
;    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;    GNU General Public License for more details.
;
;    You should have received a copy of the GNU General Public License
;    along with ds30 Loader. If not, see <http://www.gnu.org/licenses/>.
;------------------------------------------------------------------------------


;------------------------------------------------------------------------------
; Device
;------------------------------------------------------------------------------
LIST      P=18F4620; ;xxx


;------------------------------------------------------------------------------
; Includes
;------------------------------------------------------------------------------
        #include "devices.inc"


;------------------------------------------------------------------------------
; User preferences
;------------------------------------------------------------------------------
radix DEC

#define DEV_MODE 1 ;xxx delete or comment this line
#define OSCF 20000000 ;xxx oscillator frequency
#define BLTIME 2000 ;xxx data receive timeout [ms]
#define BLINIT 2000 ;xxx hello receive timeout [ms]
#define HELLOTRIES 2 ;xxx number of non hello characters received before branching to the user application


;------------------------------------------------------------------------------
; UART settings
;------------------------------------------------------------------------------
#define BAUDRATE 115200 ;xxx baudrate
#define USE_UART1 1 ;xxx uncomment to use uart1
;#define USE_UART2 1 ;xxx uncomment to use uart2
;#define USE_BRG16 1 ;xxx uncomment to use 16-bit brg

;#define USE_TXENABLE 1 ;xxx uncomment to use a tx enable pin
#ifdef USE_TXENABLE
#define TRISR_TXE TRISC ;xxx tris register containing tx enable
#define LATR_TXE LATC ;xxx port register containing tx enable
#define TRISB_TXE TRISC6 ;xxx tris bit for tx enable
#define LATB_TXE RC6 ;xxx port bit for tx enable
#endif


;------------------------------------------------------------------------------
; CAN settings
;------------------------------------------------------------------------------
;#define USE_CAN ;xxx uncomment to use CAN instead of UART
#define ID_PIC 1 ;xxx node number for this device
#define ID_GUI 0x7ff ;xxx node number of the ds30 Loader gui


;------------------------------------------------------------------------------
; Advanced settings
;------------------------------------------------------------------------------
#define PROT_GOTO 1 ;xxx protect goto at 0x00
#define PROT_BL 1 ;xxx protect bootloader

#define BLPLP 7 ;bootloader placement, pages from end
#define BLSIZEP 7 ;bootloader size [pages], used by bootloader protection


;------------------------------------------------------------------------------
; Configuration bits, these macros can be found at the end of the inc-files located in
; C:\Program Files\Microchip\MPASM Suite\
;
; These can also be set in MPLAB IDE instead, they are found in Configure->Configuration bits...
;------------------------------------------------------------------------------
;config OSC = INTIO2 ;internal oscillator
;config FSCM = OFF ;failsafe clock monitor
;config IESO = OFF ;internal external switchover mode
;config PWRT = OFF ;power-up timer
;config BOR = OFF ;brown-out reset
;config BORV = 27 ;brown-out reset value
;config WDT = OFF ;watchdog timer
;config WDTPS = 1 ;1:1 WDT prescalar
;config MCLRE = ON ;MCLR
;config STVR = ON ;stack overflow reset
;config LVP = OFF ;low voltage programming
;config DEBUG = OFF ;debug
;config CP0 = OFF ;
;config CP1 = OFF ;
;config CPB = OFF ;
;config CPD = OFF ;
;config WRT0 = OFF ;
;config WRT1 = OFF ;
;config WRTB = OFF ;
;config WRTC = OFF ;
;config WRTD = OFF ;
;config EBTR0 = OFF ;
;config EBTR1 = OFF ;
;config EBTRB = OFF ;

;__CONFIG _CONFIG1L, _PLLDIV_5_1L & _CPUDIV_OSC3_PLL4_1L & _USBDIV_2_1L
;__CONFIG _CONFIG1H, _FOSC_HSPLL_HS_1H & _FCMEM_OFF_1H & _IESO_OFF_1H
;__CONFIG _CONFIG2L, _PWRT_ON_2L & _BOR_OFF_2L ; _VREGEN_OFF_2L
;__CONFIG _CONFIG2H, _WDT_OFF_2H & _WDTPS_1_2H
;__CONFIG _CONFIG3H, _MCLRE_ON_3H & _PBADEN_OFF_3H & _CCP2MX_OFF_3H
;__CONFIG _CONFIG4L, _DEBUG_OFF_4L & _LVP_OFF_4L & _STVREN_OFF_4L & _XINST_OFF_4L
;__CONFIG _CONFIG5L, _CP0_OFF_5L & _CP1_OFF_5L & _CP2_OFF_5L
;__CONFIG _CONFIG5H, _CPB_OFF_5H & _CPD_OFF_5H
;__CONFIG _CONFIG6L, _WRT0_OFF_6L & _WRT1_OFF_6L & _WRT2_OFF_6L & _WRT3_OFF_6L
;__CONFIG _CONFIG6H, _WRTB_OFF_6H & _WRTC_OFF_6H & _WRTD_OFF_6H
;__CONFIG _CONFIG7L, _EBTR0_OFF_7L & _EBTR1_OFF_7L & _EBTR2_OFF_7L & _EBTR3_OFF_7L
;__CONFIG _CONFIG7H, _EBTRB_OFF_7H