2014-07-22, 17:10:16
According to module's manual uart mode is preselected since the pgd pin is not connected to gnd.You can find all availiable software and the hex files from vendor here there are both hex files and source codes. Mostly i'm interested to falsh MB-CM13111_1 which is for usb hosting mouse/keyboard.
I also just tried a real com port which is onboard my motherboard. This time, when i tried to flash the module i got:
(i instantly put mclr to gnd to get this, otherwise can't find bootloader)
Also this is what iget on vendor's com assistant program:
I also just tried a real com port which is onboard my motherboard. This time, when i tried to flash the module i got:
Also this is what iget on vendor's com assistant program: