2010-12-20, 23:34:25
(This post was last modified: 2010-12-20, 23:38:59 by ozybushwalker.)
Thanks for the suggestion on the full path; that did the trick. If I recall correctly I had earlier been specifying the full path (which was quite long since the binary was built by MPLAB X) and a non-existing file was reported but I've been unable to reproduce that problem.
Unfortunately I'm still unable to program my device (Web Platform from dangerous prototypes). As best I can recall, I'm using the same procedure as when I successfully used the Windows loader a few months ago but maybe something on the board broke in the meantime. Here's what happens:
Unfortunately I'm still unable to program my device (Web Platform from dangerous prototypes). As best I can recall, I'm using the same procedure as when I successfully used the Windows loader a few months ago but maybe something on the board broke in the meantime. Here's what happens:
Code:
Device: dsPIC33FJ128GP204
Port: /dev/ttyUSB0
Baudrate: 115200
Press any key to begin download
Initiating download...
Opening port /dev/ttyUSB0@115200
Searching for bl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . timed out
Closing port
Tx 50 bytes / Rx 0 bytes / 5.1s
Press any key to continue