problem with PIC16F877 [solved]

[antonadc]

I have partially solved the problem. Firstly I discoverred to my horrer I had an old ds30 program. I re-installed the new program and it all seemed to work ok until I discovered that the 877 code will not work. Checking my hex file (From Proton+ crownhill ass) The first location for the 18 and 16 series is zero. This is to make way for the location 0 goto instruction. Not much I can do. The ds30 18 BL has one location open at 0 and that is for the goto. Now the ds30 bl for the 16 series has 3 bytes in it 2 for bank switching and the last for goto. Can the first 2 bytes not be removed and the goto put at 0? Please.

Thanks

Anton