2011-06-03, 15:05:03
(This post was last modified: 2024-07-04, 21:04:46 by Mikael Gustavsson.)
Hi all,
As the title says i have managed to get the bootloader to work but after i load anything for the first time I cant load anything else onto it. the pic im using is an 18F6723 and im using uart2 for the bootloader.
the following is my settings file
The following is the test file I have been trying to load with the bootloader
Another thing, I tried changing the oscf to 8000000 and the osc to hc but when i did this i got the following error from the bl gui
Thanks in advance for your help
Liam
As the title says i have managed to get the bootloader to work but after i load anything for the first time I cant load anything else onto it. the pic im using is an 18F6723 and im using uart2 for the bootloader.
the following is my settings file
Code:
;------------------------------------------------------------------------------
;
; Title: ds30 Loader for PIC18F
;
; File description: user settings and configuration bits
;
; Copyright: Copyright � 09-11, Mikael Gustafsson
;
; History: 3.0.0 first version of this file
;
;------------------------------------------------------------------------------
;------------------------------------------------------------------------------
; This file is part of ds30 Loader.
;
; ds30 Loader is free software: you can redistribute it and/or modify
; it under the terms of the GNU General Public License as published by
; the Free Software Foundation.
;
; ds30 Loader is distributed in the hope that it will be useful,
; but WITHOUT ANY WARRANTY; without even the implied warranty of
; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
; GNU General Public License for more details.
;
; You should have received a copy of the GNU General Public License
; along with ds30 Loader. If not, see <http://www.gnu.org/licenses/>.
;------------------------------------------------------------------------------
;------------------------------------------------------------------------------
; Device
;------------------------------------------------------------------------------
processor 18F6723 ;xxx
;------------------------------------------------------------------------------
; Includes
;------------------------------------------------------------------------------
#include "devices.inc"
;------------------------------------------------------------------------------
; User preferences
;------------------------------------------------------------------------------
radix DEC
#define OSCF 32000000 ;xxx oscillator frequency
#define BLINIT 2000 ;xxx hello receive timeout [ms]
#define HELLOTRIES 2 ;xxx number of non hello characters received before branching to the user application
#define BLTIME 2000 ;xxx data receive timeout [ms]
;------------------------------------------------------------------------------
; UART settings
;------------------------------------------------------------------------------
;#define USE_UART1 1 ;xxx uncomment to use uart1
#define USE_UART2 1 ;xxx uncomment to use uart2
#define BAUDRATE 115200 ;xxx baudrate
;#define USE_ABAUD 1 ;xxx uncomment to use auto baud rate detection, READ ERRATA FIRST
#define USE_BRG16 1 ;xxx uncomment to use 16-bit brg
;#define USE_TXENABLE 1 ;xxx uncomment to use a tx enable pin
#ifdef USE_TXENABLE
#define TRISR_TXE TRISC ;xxx tris register containing tx enable
#define LATR_TXE LATC ;xxx port register containing tx enable
#define TRISB_TXE TRISC6 ;xxx tris bit for tx enable
#define LATB_TXE RC6 ;xxx port bit for tx enable
#endif
;------------------------------------------------------------------------------
; CAN settings, commercial version only www.ds30loader.com
;------------------------------------------------------------------------------
;------------------------------------------------------------------------------
; Security, commercial version only www.ds30loader.com
;------------------------------------------------------------------------------'
;------------------------------------------------------------------------------
; Advanced settings
;------------------------------------------------------------------------------
#define PROT_GOTO 1 ;xxx protect goto at 0x00
#define PROT_BL 1 ;xxx protect bootloader
ifdef IS_PIC18F
#define BLPLP 8 ;bootloader placement, pages from end
#define BLSIZEP 8 ;bootloader size [pages], used by bootloader protection
endif
ifdef IS_PIC18FJ
#define BLPLP 2 ;bootloader placement, pages from end
#define BLSIZEP 1 ;bootloader size [pages], used by bootloader protection
endif
;------------------------------------------------------------------------------
; Configuration bits, these macros can be found at the end of the inc-files located in
; C:\Program Files\Microchip\MPASM Suite\
;
; These can also be set in MPLAB IDE instead, they are found in Configure->Configuration bits...
;------------------------------------------------------------------------------
; xxx
; config PLLDIV = 4 ;PLL Prescaler Selection bits
; config CPUDIV = OSC1_PLL2 ;System Clock Postscaler Selection bits
; config USBDIV = 2 ;USB Clock Selection bit (used in Full-Speed USB mode only; UCFG:FSEN = 1)
; config FOSC = HSPLL_HS ;Oscillator Selection bits
; config FCMEN = OFF ;Fail-Safe Clock Monitor Enable bit
; config IESO = OFF ;Internal/External Oscillator Switchover bit
; config PWRT = ON ;Power-up Timer Enable bit
; config BOR = OFF ;Brown-out Reset Enable bits
; config BORV = 0 ;Brown-out Reset Voltage bits
; config VREGEN = OFF ;USB Voltage Regulator Enable bit
; config WDT = OFF ;Watchdog Timer Enable bit
; config WDTPS = 1 ;Watchdog Timer Postscale Select bits
; config CCP2MX = OFF ;CCP2 MUX bit
; config PBADEN = OFF ;PORTB A/D Enable bit
; config LPT1OSC = OFF ;Low-Power Timer 1 Oscillator Enable bit
; config MCLRE = ON ;MCLR Pin Enable bit
; config STVREN = ON ;Stack Full/Underflow Reset Enable bit
; config LVP = OFF ;Single-Supply ICSP Enable bit
; config XINST = OFF ;Extended Instruction Set Enable bit
; config DEBUG = OFF ;Background Debugger Enable bit
; config CP0 = OFF ;Code Protection bit
; config CP1 = OFF ;Code Protection bit
; config CP2 = OFF ;Code Protection bit
; config CP3 = OFF ;Code Protection bit
; config CPB = OFF ;Boot Block Code Protection bi
; config CPD = OFF ;Data EEPROM Code Protection bit
; config WRT0 = OFF ;Write Protection bit
; config WRT1 = OFF ;Write Protection bit
; config WRT2 = OFF ;Write Protection bit
; config WRT3 = OFF ;Write Protection bit
; config WRTC = OFF ;Configuration Register Write Protection bit
; config WRTB = OFF ;Boot Block Write Protection bit
; config WRTD = OFF ;Data EEPROM Write Protection bit
; config EBTR0 = OFF ;Table Read Protection bit
; config EBTR1 = OFF ;Table Read Protection bit
; config EBTR2 = OFF ;Table Read Protection bit
; config EBTR3 = OFF ;Table Read Protection bit
; config EBTRB = OFF ;Boot Block Table Read Protection bit
CONFIG OSC = HSPLL
CONFIG FCMEN = OFF
CONFIG IESO = OFF
CONFIG PWRT = ON
CONFIG BOREN = OFF
CONFIG BORV = 0
CONFIG WDT = OFF
CONFIG WDTPS = 1
CONFIG CCP2MX = PORTE
CONFIG LPT1OSC = OFF
CONFIG MCLRE = ON
CONFIG STVREN = OFF
CONFIG LVP = OFF
CONFIG BBSIZ = BB4K
CONFIG XINST = OFF
CONFIG DEBUG = OFF
CONFIG CP0 = OFF
CONFIG CP1 = OFF
CONFIG CP2 = OFF
CONFIG CP3 = OFF
CONFIG CP4 = OFF
CONFIG CP5 = OFF
CONFIG CP6 = OFF
CONFIG CP7 = OFF
CONFIG CPB = OFF
CONFIG CPD = OFF
CONFIG WRT0 = OFF
CONFIG WRT1 = OFF
CONFIG WRT2 = OFF
CONFIG WRT3 = OFF
CONFIG WRT4 = OFF
CONFIG WRT5 = OFF
CONFIG WRT6 = OFF
CONFIG WRT7 = OFF
CONFIG WRTC = OFF
CONFIG WRTB = OFF
CONFIG WRTD = OFF
CONFIG EBTR0 = OFF
CONFIG EBTR1 = OFF
CONFIG EBTR2 = OFF
CONFIG EBTR3 = OFF
CONFIG EBTR4 = OFF
CONFIG EBTR5 = OFF
CONFIG EBTR6 = OFF
CONFIG EBTR7 = OFF
CONFIG EBTRB = OFF
;------------------------------------------------------------------------------
; End of file
;------------------------------------------------------------------------------The following is the test file I have been trying to load with the bootloader
Code:
#include <18f6723.h>
#fuses none
void main()
{
int a = 1 , b = 0;
while(a)
{
b++;
}
}Another thing, I tried changing the oscf to 8000000 and the osc to hc but when i did this i got the following error from the bl gui
Quote:Initiating write...
Searching for bl .
Found PIC18F6723 fw ver. 3.0.0
Waiting for bootloader to be ready...ok
Writing flash ... unknown response 0x00, 1 try
Writing flash ... The hardware detected a framing error.
Write failed
Tx 153 bytes / Rx 8 bytes/0.5s
Thanks in advance for your help
Liam