2012-07-24, 07:17:48
(2012-07-24, 00:05:16)Mikael Gustafsson Wrote: The FOSC define in settings.inc is set to 500000. It should be set to 8000000 if you are using a 8MHz clock.It was set in the beginning to 8000000 but I did not succeeded to get it worked so I tried to send a constant char on the tx line in a loop and analyze it with a logic analyzer, I saw that I get the output in around 600 boud, only when I put the 500000 I saw significant output in 9600 on the logic but even then after remove the tx loop I did not succeed to connect.
Thanks,
Eyal