Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Found PIC18F25K20 fw ver. 5.4.11 Unknown firmware version [solved]
#1
DS30Loader Version : 1.5.3 (engine 2.2.7)

Initiating write...
Searching for bl . . . . . . . . . . . . .
Found PIC18F25K20 fw ver. 5.4.11
Unknown firmware version
Tx 13 bytes / Rx 3 bytes / 6,2s
Write failed

I'm new to this, so any help is welcome
Reply
#2
I would recommend you to first try a different baud rate.
Reply
#3
(2012-08-30, 13:06:06)Mikael Gustavsson Wrote: I would recommend you to first try a different baud rate.

Everything, except 115200 gives

Initiating write...
Searching for bl . . . . . . . . . . . . . . . . . . . . timed out
Tx 20 bytes / Rx 0 bytes / 10s
Write failed

BTW, board is a XINO for pic v1.2
Reply
#4
(2012-08-30, 13:17:11)zorka Wrote:
(2012-08-30, 13:06:06)Mikael Gustavsson Wrote: I would recommend you to first try a different baud rate.

Everything, except 115200 gives

Initiating write...
Searching for bl . . . . . . . . . . . . . . . . . . . . timed out
Tx 20 bytes / Rx 0 bytes / 10s
Write failed

BTW, board is a XINO for pic v1.2

Downgrading to ds30LoaderGui 1.3.14.0, ds30loader dll 1.5.0.0, seems to have fixed my problem.
Reply
#5
You might have got the wrong settings with the new GUI.
It stores it's setting in a different location than the old versions.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)