Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Bootloader modifications for PIC16F1847 [solved]
#1
Hi,
I successfully tested the PIC16F bootloader with PIC16F1827 (running at 20MHz external clock) following the suggestions posted by Andrew here:

http://mrmackey.no-ip.org/elektronik/ds3...hp?tid=555

However, when I recompiled the bootloader for PIC16F1847 (running at 20MHz external clock), the GUI returns the following error.

Searching for bl .
Found PIC16F1513 fw ver. 1.0.2
Wrong pic detected(499)/selected(468), aborting

While recompiling the bootloader for PIC16F1847, the only changes I made is the device select in MPLAB-X, as the hardware setup is same as that for PIC16F1827.

Any suggestion, why the GUI is detecting a wrong PIC.

Thanks,
Raj
Reply
#2
Hi,
Please attach the entire modified MPLAB IDE project and the ds30 Loader GUI binary used.

Thanks
Mikael
Reply
#3
Please find the modified IDE project and the loader GUI binary in the attached zip folder.

Thank you for your time and effort.

Raj
(2013-05-17, 20:23:33)Mikael Gustavsson Wrote: Hi,
Please attach the entire modified MPLAB IDE project and the ds30 Loader GUI binary used.

Thanks
Mikael


Attached Files
.zip   PIC16F1847_ds30loader.zip (Size: 226.69 KB / Downloads: 18)
Reply
#4
Thanks,
Please download the latest package. This has already been fixed some time ago.
Reply
#5
May I ask where is the link to your latest package? The one I am using has a time stamp of 121109, and I downloaded it from here:
http://mrmackey.no-ip.org/elektronik/ds3...hp?tid=508

Or can you attach the fixed one here as a zipped folder?

Thanks,
Raj
Reply
#6
The file may have been updated without a proper release.
Reply
#7
Sorry, I didn't get it properly. So, what is the solution to this problem? Can you help me with this?
Reply
#8
Redownload the latest package and use the firmware in there or copy the new devices_PIC16F.inc file to your current MPLAB project.
Reply
#9
Ok, I will try it and let you know how it goes.

Thanks,
Raj
Reply
#10
Hi Mikael,
I tried the new devices_PIC16F.inc file and it still didn't work. The GUI shows the same error.

Initiating write...
Searching for bl . . . .
Found PIC16F1513 fw ver. 1.0.2
Wrong pic detected(499)/selected(640), aborting
Tx 4 bytes / Rx 3 bytes / 1.6s
Write failed

I have attached the new zipped folder.

Thanks,
Raj

PS: I didn't see any changes in the new deivices_PIC16F.inc file. The time stamp on this file is March 21, which is the same file I used last time. FYI, I am using the download link available on this page:

http://mrmackey.no-ip.org/elektronik/ds3...hp?tid=508

(2013-05-19, 23:09:20)Mikael Gustavsson Wrote: Redownload the latest package and use the firmware in there or copy the new devices_PIC16F.inc file to your current MPLAB project.


Attached Files
.zip   firmware PIC12F PIC16F.zip (Size: 68.66 KB / Downloads: 7)
Reply
#11
Oh, now I have updated the package in the forum:
http://mrmackey.no-ip.org/elektronik/ds3...hp?aid=210
Reply
#12
Mikael,
This is great! Now it works well. Thank you for your help.

Raj

(2013-05-25, 11:37:12)Mikael Gustavsson Wrote: Oh, now I have updated the package in the forum:
http://mrmackey.no-ip.org/elektronik/ds3...hp?aid=210
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)