Posts: 8
Threads: 1
Joined: May 2013
2013-05-15, 18:00:40
(This post was last modified: 2013-05-26, 13:42:59 by Mikael Gustavsson .)
Hi,
I successfully tested the PIC16F bootloader with PIC16F1827 (running at 20MHz external clock) following the suggestions posted by Andrew here:
http://mrmackey.no-ip.org/elektronik/ds3...hp?tid=555
However, when I recompiled the bootloader for PIC16F1847 (running at 20MHz external clock), the GUI returns the following error.
Searching for bl .
Found PIC16F1513 fw ver. 1.0.2
Wrong pic detected(499)/selected(468), aborting
While recompiling the bootloader for PIC16F1847, the only changes I made is the device select in MPLAB-X, as the hardware setup is same as that for PIC16F1827.
Any suggestion, why the GUI is detecting a wrong PIC.
Thanks,
Raj
Posts: 621
Threads: 0
Joined: Nov 2009
Hi,
Please attach the entire modified MPLAB IDE project and the ds30 Loader GUI binary used.
Thanks
Mikael
Posts: 8
Threads: 1
Joined: May 2013
Please find the modified IDE project and the loader GUI binary in the attached zip folder.
Thank you for your time and effort.
Raj
(2013-05-17, 20:23:33) Mikael Gustavsson Wrote: Hi,
Please attach the entire modified MPLAB IDE project and the ds30 Loader GUI binary used.
Thanks
Mikael
Attached Files
PIC16F1847_ds30loader.zip (Size: 226.69 KB / Downloads: 18)
Posts: 621
Threads: 0
Joined: Nov 2009
Thanks,
Please download the latest package. This has already been fixed some time ago.
Posts: 8
Threads: 1
Joined: May 2013
May I ask where is the link to your latest package? The one I am using has a time stamp of 121109, and I downloaded it from here:
http://mrmackey.no-ip.org/elektronik/ds3...hp?tid=508
Or can you attach the fixed one here as a zipped folder?
Thanks,
Raj
Posts: 621
Threads: 0
Joined: Nov 2009
The file may have been updated without a proper release.
Posts: 8
Threads: 1
Joined: May 2013
Sorry, I didn't get it properly. So, what is the solution to this problem? Can you help me with this?
Posts: 621
Threads: 0
Joined: Nov 2009
Redownload the latest package and use the firmware in there or copy the new devices_PIC16F.inc file to your current MPLAB project.
Posts: 8
Threads: 1
Joined: May 2013
Ok, I will try it and let you know how it goes.
Thanks,
Raj
Posts: 8
Threads: 1
Joined: May 2013
2013-05-25, 04:15:08
(This post was last modified: 2013-05-25, 04:22:30 by rajbex .)
Hi Mikael,
I tried the new devices_PIC16F.inc file and it still didn't work. The GUI shows the same error.
Initiating write...
Searching for bl . . . .
Found PIC16F1513 fw ver. 1.0.2
Wrong pic detected(499)/selected(640), aborting
Tx 4 bytes / Rx 3 bytes / 1.6s
Write failed
I have attached the new zipped folder.
Thanks,
Raj
PS: I didn't see any changes in the new deivices_PIC16F.inc file. The time stamp on this file is March 21, which is the same file I used last time. FYI, I am using the download link available on this page:
http://mrmackey.no-ip.org/elektronik/ds3...hp?tid=508
(2013-05-19, 23:09:20) Mikael Gustavsson Wrote: Redownload the latest package and use the firmware in there or copy the new devices_PIC16F.inc file to your current MPLAB project.
Attached Files
firmware PIC12F PIC16F.zip (Size: 68.66 KB / Downloads: 7)
Posts: 621
Threads: 0
Joined: Nov 2009
Posts: 8
Threads: 1
Joined: May 2013
Mikael,
This is great! Now it works well. Thank you for your help.
Raj
(2013-05-25, 11:37:12) Mikael Gustavsson Wrote: Oh, now I have updated the package in the forum:
http://mrmackey.no-ip.org/elektronik/ds3...hp?aid=210