Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Help making hex for picf184550
#1
Hi there, i'm having problems making the hex code to program into a pic18f4550. I downloaded DS30 Loader files, but when i build all i get errors.
I am running MPLAB IDE 8.5 and XC8 v1.21.

Am i running the wrong software or versions???

Thanks:
Reply
#2
Hi,
Please zip and post the modified boot loader project.

Thanks
Reply
#3
(2013-10-22, 13:23:11)Mikael Gustavsson Wrote: Hi,
Please zip and post the modified boot loader project.

Thanks

Hi Mikael,

It's just the DS30 Loader firmware_PIC18F.

I'm planning on designing a Solar Charge Controller with a PIC18F4550.
The idea of being able to update the code via USB to the PIC18F4550
is perfect for onsite tweeks or upgrades.

But first i need to be able to compile the DS30 bootloader and program it
into my PIC.

BTW- would it take much to add LCD support to the bootloader?
IE Get the LCD to display text while conected to the pc via USB?
or would it take up to much program space?

Thanks in advance Michael


.zip   firmware_PIC18F.zip (Size: 56.25 KB / Downloads: 38)
Reply
#4
I suggest that you read the documentation and modify settings.inc accordingly.
Reply
#5
Hi Mikael,

I was assuming all i have to change is the processor to PIC18F4550
in the Settings.inc, The circuit i was planning on using has a 20Mhz
crystal and 22pf cap's for timing.

When i Build All i get the following;

Debug build of project `C:\DS30-Loader\firmware_PIC18F\ds30Loader.mcp' started.
Language tool versions: MPASMWIN.exe v5.35, mplink.exe v4.35
Preprocessor symbol `__DEBUG' is defined.
Tue Oct 29 09:19:22 2013
----------------------------------------------------------------------
Clean: Deleting intermediary and output files.
Clean: Deleted file "C:\DS30-Loader\firmware_PIC18F\ds30Loader.mcs".
Clean: Done.
Executing: "C:\Microchip\MPASM Suite\MPASMWIN.exe" /q /p18F4550 "ds30loader.asm" /l"ds30loader.lst" /e"ds30loader.err" /d__DEBUG=1
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 99 : CONFIG Directive Error: (setting "RETEN" not found for the processor 18F4550)
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 100 : CONFIG Directive Error: (setting "INTOSCSEL" not found for the processor 18F4550)
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 101 : CONFIG Directive Error: (setting "SOSCSEL" not found for the processor 18F4550)
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 103 : CONFIG Directive Error: (value "HS1" not valid for setting "FOSC")
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 104 : CONFIG Directive Error: (setting "PLLCFG" not found for the processor 18F4550)
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 107 : CONFIG Directive Error: (setting "PWRTEN" not found for the processor 18F4550)
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 108 : CONFIG Directive Error: (setting "BOREN" not found for the processor 18F4550)
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 110 : CONFIG Directive Error: (setting "BORPWR" not found for the processor 18F4550)
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 111 : CONFIG Directive Error: (setting "WDTEN" not found for the processor 18F4550)
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 113 : CONFIG Directive Error: (setting "CANMX" not found for the processor 18F4550)
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 114 : CONFIG Directive Error: (setting "T0CKMX" not found for the processor 18F4550)
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 115 : CONFIG Directive Error: (setting "T3CKMX" not found for the processor 18F4550)
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 116 : CONFIG Directive Error: (setting "MSSPMSK" not found for the processor 18F4550)
Error[176] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\SETTINGS.INC 120 : CONFIG Directive Error: (setting "BBSIZ" not found for the processor 18F4550)
Error[101] C:\DS30-LOADER\FIRMWARE_PIC18F\SRC\USER_CODE.INC 36 : ERROR: (Do you need to configura uart pins to be digital? If not, remove this line)
Halting build on first failure as requested.
----------------------------------------------------------------------
Debug build of project `C:\DS30-Loader\firmware_PIC18F\ds30Loader.mcp' failed.
Language tool versions: MPASMWIN.exe v5.35, mplink.exe v4.35
Preprocessor symbol `__DEBUG' is defined.
Tue Oct 29 09:19:23 2013
----------------------------------------------------------------------
BUILD FAILED

Thanks Michael
Reply
#6
Hi,
I am sorry for the late reply.

In the files you posted, settings.inc was not touched at all.

You need to configure the configuration bits, either from code or on Configure menu in MPLAB IDE.
You can remove all config directives in settings.inc and start all over if you like.

How do you setup the config bits in your application?
Reply
#7
(2013-10-22, 23:23:15)Michael Scott Wrote:
(2013-10-22, 13:23:11)Mikael Gustavsson Wrote: Hi,
Please zip and post the modified boot loader project.

Thanks

Hi Mikael,

It's just the DS30 Loader firmware_PIC18F.

I'm planning on designing solar kits Controller with a PIC18F4550.
The idea of being able to update the code via USB to the PIC18F4550
is perfect for onsite tweeks or upgrades.

But first i need to be able to compile the DS30 bootloader and program it
into my PIC.

BTW- would it take much to add LCD support to the bootloader?
IE Get the LCD to display text while conected to the pc via USB?
or would it take up to much program space?

Thanks in advance Michael

Hello friend bit old thread have you got the complete system? It looks fair program to me so can you share some more information..
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)